ATRIA Floor Systems
Seamless floors.
Built layer by layer.
From substrate prep to sealed finish — our Italian microcement system delivers monolithic, durable floors in just 3–5 mm of total build-up.
Sealer × 2
Atriapol — matte or gloss topcoat
Matte or gloss topcoat — 2 coats applied by roller. Creates a sealed, stain-resistant surface with UV stability.
2nd Finish Coat
Titanium or SuperTitanium BC
Second decorative coat applied by steel trowel. Builds color depth and the signature microcement texture.
1st Finish Coat
Titanium or SuperTitanium BC
First decorative coat — sets the base color. Applied in thin, overlapping strokes with a flexible steel trowel.
2nd Basecoat
Rasante One — steel-trowel levelling
Steel-trowel levelling coat — fills imperfections and creates a flat, uniform surface for the finish coats.
1st Basecoat
Rasante One — steel-trowel base
First basecoat layer — applied over the mesh to encapsulate the fiberglass and begin building a flat, uniform surface.
Fiberglass Mesh
160 gsm reinforcement layer
Alkali-resistant fiberglass mesh embedded into the first basecoat. Distributes stress and prevents cracking.
Primer
Atriafloor Primer BC — epoxy bonding
Epoxy bonding primer — creates a chemical bridge between the substrate and the microcement system.
Prepared Substrate
Scarified · levelled · clean · dry
Must be scarified, levelled, clean, and dry. Any cracks wider than 0.5 mm should be pre-treated.
Shop Products
PURO
Atriafloor Consolidante
Two-component water-based consolidating epoxy primer with deep penetration and anti-dust action. Strengthens weak or poorly cohesive cementitious surfaces, blocks surface dust, and improves adhesion for subsequent Atriafloor decorative cycles. Essential first step on concrete, marble, screeds, and mineral substrates.
5 kg (~0.7 gal)
PURO
Atriafloor Primer BC
Two-component water-based epoxy anchoring primer with excellent chemical resistance. Essential first step in the Atriafloor system — bonds to difficult surfaces including ceramic, tile, wood, MDF, and glass. For interior walls and floors.
5 kg (~0.7 gal)
PURO
Atriafloor One Rasante
True Cement two-component cementitious filler for leveling and regularizing interior surfaces. High-performance compound for smoothing tiles, joints, cracks, and micro-cracks — preparing the perfect base for Atriafloor decorative coatings. Applied by steel spatula, custom-tintable.
20 kg A+B (~2.9 gal)
PURO
SuperTitanium BC
Premium two-component decorative polyurethane resin with controlled grain aggregates. High filling capacity, excellent mechanical strength, and a refined trowelled finish. Hard-elastic, closed-pore, highly abrasion-resistant — ideal for walls and floors in commercial spaces, prestigious residential environments, and contemporary design settings. Water-based, eco-friendly formulation.
20 kg (~2.9 gal)
PURO
Titanium
Single-component decorative polyurethane resin with controlled grain aggregates. Creates seamless surfaces with high aesthetic value and distinctive material feel — spatula effect with velvety texture. For contemporary, industrial, and elegant interior environments. Hard-elastic, closed-pore, water-based. ReMade in Italy certified.
20 kg (~2.9 gal)
PURO
Titanium Superfino
Ultra-fine grain variant of Atriafloor Titanium — same single-component polyurethane formula with finer aggregates for a silkier, smoother finish. Creates seamless surfaces with exceptional tactile quality. Ideal for feature walls, furniture surfaces, and high-end residential interiors.
20 kg (~2.9 gal)
PURO
Resina One
Two-component decorative cementitious resin with true cement effect. Creates seamless surfaces with modern, elegant, textured aesthetics. Composed of a liquid polymer base and a solid True Cement powder blend — for floors and walls in low-traffic residential and commercial environments. ReMade in Italy certified.
20 kg A+B (~2.9 gal)
PURO
Atriafloor Filler
Single-component transparent sealing filler based on modified polyurethane resins. Applied AFTER the decorative resin coat — fills pores, saturates capillary voids, and creates a slightly satin protective film. Limits dust and liquid absorption, facilitates maintenance. Interior use only. Can be tinted with compatible colour pastes.
5 L (~1.3 gal)
PURO
Atriapol Antibacterial Matte
Two-component water-dilutable polyurethane UV-resistant transparent finish with ISO 22196:2011 antibacterial certification. Creates a durable protective film that preserves surfaces from daily wear, chemical agents, and stains. Matte finish (10-18 gloss at 60°). Antibacterial action tested against E. coli and S. aureus.
5 L (~1.3 gal)
PURO
Atriapol Antibacterial Gloss
Two-component water-dilutable polyurethane UV-resistant transparent finish — gloss variant. Same ISO 22196:2011 antibacterial formula as the matte version, with a high-sheen polished finish (minimum 75 gloss at 60°). Creates a brilliant, easily washable protective film.
5 L (~1.3 gal)
Color Palette
Find Your Shade
16 curated tones — from warm naturals to deep charcoals. Click any swatch to add to cart with your preferred finish.
Don't see your shade? Click “Custom Color” above — we can match nearly any color with an exact code reference.
Ready to start your project?
Shop the complete floor system, or talk to our team for project-specific guidance and custom tinting.