PURO
Atriafloor Primer BC
Two-component water-based epoxy anchoring primer with excellent chemical resistance. Essential first step in the Atriafloor system — bonds to difficult surfaces including ceramic, tile, wood, MDF, and glass. For interior walls and floors.
Price
$252.99
Coverage calculator
Atriafloor Primer BC coverage
5 kg kit
Estimate
1 unit
Approx. $252.99
Product needed
1.1-1.4 kg
One 5 kg kit covers about 359-448 sq ft for this application.
TDS: 120-150 g/m2 per coat
TDS-based estimate only. Substrate condition, texture depth, color choice, and installer technique can change real usage.
Professional-Grade Application Product
This product is part of a multi-step application system that requires proper surface preparation and technique for best results.
Two-component water-based epoxy anchoring primer with excellent chemical resistance. Essential first step in the Atriafloor system — bonds to difficult surfaces including ceramic, tile, wood, MDF, and glass. For interior walls and floors.
Specifications
- Coverage: 6.7–8.3 m²/kg per coat (120–150 gr/m²)
- Density: 1,450 ± 0.01 kg/Lt
- Appearance: Satin, White
- Viscosity: 100–130 sec Ford 4
- Dry residue: 52 ± 2%
- Mixing ratio: 80/20 (base/catalyst) by weight
- Pot life: 2 hours at 25°C
- Dilution (brush): 5–15% water
- Dilution (roller): 8–15% water
- Dilution (spray): 8–20% water
- Application: Brush, Roller, Conventional Spray, Airless
- Substrate: Ceramic, stoneware, tiles, wood, MDF, glass, concrete, screed
- Touch dry: 2–3 hours
- Tack-free: 8–12 hours
- Through dry: 18–24 hours
- Overcoating: Min 8–12 hours / Max 15 days
- Walkability: 12–18 hours (at 23°C, 55% RH)
- Application temp: +5°C / +35°C
- Operating temp: -15°C / +120°C
- Storage: Base 24 months / Hardener 12 months
- Standard packs: 1 kg, 5 kg
Key Features
- Two-component water-based epoxy primer
- Excellent adhesion on smooth, non-absorbent surfaces (tile, ceramic, glass, MDF)
- Good chemical and mechanical resistance
- Quick drying — allows rapid processing cycles
- Low VOC, solvent-free
- ReMade in Italy certified
Go to the PURO store page to see available products, sizes, calculators, color options, and related materials.
About this finish
Primers & Sealers
What it is
Which of these do I actually need? This family is the invisible half of every ATRIA system: the primer that makes the finish stick, and the sealer that makes it last. The rule is simple — Primerquarz for walls, Atriafloor Primer BC for floors, whether that is bare concrete and screed or existing tile, wood, and glass — and every floor or wet-area job ends with Atriapol on top, because microcement is never waterproof from a single can: it is the sealed assembly, base coat plus Atriapol, that handles water.
Atriafloor Primer BC: The difficult-surface primer. A two-component water-based epoxy that anchors to ceramic, tile, stoneware, wood, MDF, and glass — the product that lets microcement go over existing tile without demolition.
Why choose it
- Two primers cover every substrate — quartz-grip acrylic for walls, and an anchoring two-component epoxy that bonds to concrete, screed, tile, wood, and glass — so renovation rarely means demolition.
- Both Atriapol topcoats carry ISO 22196:2011 antibacterial certification (tested against E. coli and S. aureus) and are UV-resistant and non-yellowing.
- The topcoat spec is measured, not promised: over 10,000 wet-abrasion cycles (DIN 53778) and adhesion above 3.6 MPa (EN 1542) — measured on the topcoat that finishes the waterproof-by-assembly system.
How it’s applied
- 01Match the primer to the surface: Primerquarz on walls, Atriafloor Primer BC on floors — bare concrete, screed, tile, ceramic, wood, MDF, or glass.
- 02Prepare the substrate first: it must be solid, dry and clean. Completely remove dust, residues, and loose or flaking parts by vacuuming, brushing, or sanding — Primer BC must not go onto a dusty or unstable surface. It anchors to a sound substrate; it does not consolidate a weak or friable one, so a chalky slab needs making good before you prime.
- 03Roll or brush on one coat and let it set — Primerquarz recoats in 4–6 hours; the epoxy Primer BC waits overnight, 8–12 hours minimum.
- 04Apply your decorative coat — Titanium, SuperTitanium, or Resina One — over the primed surface. On floors, the Atriafloor One Rasante base coat goes between primer and resin.
- 05On floors, spread one thin coat of Filler to close the pores of the fresh resin (one coat only, interior only).
- 06Finish with 2–3 coats of Atriapol, matte or gloss — this sealed assembly, not any single product, is what makes bathrooms and showers work.
- 07Floors take foot traffic after about 12–14 hours; deep dry follows at 18–24 hours.
Where it works
Before you commit to a prep stack, order the made-to-order sample board of the finish you are planning — $15 ($25 for Metallicum), with $15 credited toward any order of $100 or more — so you can judge the sealed final surface in your own light. Order a sample board
More in PURO
