Microcement Floors
Seamless, grout-free flooring for residential and commercial spaces.
The Future of Flooring
Why Microcement Floors Are Replacing Tile Across Dallas
Microcement flooring has quickly become the finish of choice for architects, interior designers, and homeowners seeking a modern, seamless aesthetic without the limitations of traditional materials. Unlike tile with its inevitable grout lines, or polished concrete with its weight and cracking tendencies, microcement delivers a monolithic surface that flows continuously from room to room — creating a sense of openness and luxury that no other flooring material can match.
ATRIA's microcement system is not a generic cement overlay. It is a proprietary polyurethane-dolomite formulation manufactured in Sicily, Italy — the only system of its kind available in the United States. Where most microcement brands rely on acrylic resins that yellow over time and soften under heat, ATRIA uses modified polyurethane resins blended with crushed dolomite aggregates. The result is a floor that achieves 32 MPa compressive strength, resists temperatures from -10°C to +120°C, and maintains its color integrity for decades.
Whether you are renovating a mid-century modern home in Dallas, outfitting a new restaurant in Fort Worth, or designing a luxury loft in Deep Ellum — ATRIA microcement floors deliver the performance of commercial-grade concrete with the beauty of a handcrafted artisan finish. Every floor is unique, troweled by hand, and sealed with our industry-exclusive two-component polyurethane topcoat for lasting protection.
Advantages
Benefits of Microcement Floors
Zero Grout Lines
One continuous surface from wall to wall. No grout to clean, no joints to crack. The ultimate low-maintenance floor.
100% Waterproof for Wet Rooms
Our complete wet-area system — liquid waterproofing primer, fiberglass mesh reinforcement, two coats of decorative resin, and two coats of the hard-elastic polyurethane antibacterial topcoat — delivers a fully waterproof finish for showers, wet rooms, tub surrounds, and spa floors. For kitchens, laundry rooms, and entryways, the standard Atriafloor cycle gives you a closed-pore, anti-absorbent surface that handles everyday spills and splashes.
Ultra-Thin Application
At just 2–3mm total thickness, microcement overlays directly onto existing substrates — concrete, tile, even wood — without raising floor heights or affecting door clearances.
Commercial-Grade Durability
SuperTitanium BC achieves 32 MPa compressive strength at 28 days. Restaurants, retail stores, and high-traffic lobbies perform beautifully for years.
16 Signature Colors + Unlimited Custom
16 best-selling colours, plus unlimited custom matching from any paint library — RAL, NCS, Pantone, Benjamin Moore, Sherwin-Williams, Farrow & Ball, or a physical sample. Color does not move your tier.
Radiant Heat Compatible
Microcement's thin profile and excellent thermal conductivity make it the ideal partner for underfloor heating systems.
Residential
Microcement Floors for Homes
Open-plan living demands open-plan flooring. Microcement floors eliminate the visual interruptions of grout lines and material transitions, creating a continuous surface that makes rooms feel larger, brighter, and more cohesive.
Popular in kitchens, living areas, master suites, and entryways, microcement integrates seamlessly with underfloor heating — its thin profile and thermal conductivity make it more efficient than tile or stone. Homeowners in Dallas love the combination of European luxury with Texas-scale living spaces.
Available in 16 best-selling colours plus unlimited custom matching from any paint library — RAL, NCS, Pantone, Benjamin Moore, Sherwin-Williams, Farrow & Ball, or a physical sample. Warm sand tones for Mediterranean villas, cool ash grays for contemporary lofts, deep charcoals for dramatic statements — the palette is yours.
Commercial
Microcement Floors for Business
Restaurants, boutique hotels, retail stores, medical offices, and corporate lobbies across Dallas-Fort Worth are choosing microcement for its combination of durability and design flexibility. SuperTitanium BC's 32 MPa compressive strength handles heavy foot traffic, rolling loads, and the demands of commercial life.
Installation is faster than tile — no waiting for grout to cure, no expansion joints to plan around. Most commercial projects are completed in 5–7 working days, minimizing business downtime. And because microcement overlays existing floors, there is no demolition waste, no disposal costs, and no structural concerns.
The seamless surface is not just beautiful — it is hygienic. With no grout lines to harbor bacteria, microcement is ideal for food service, healthcare, and wellness environments where cleanliness is paramount.
Installation Process
How We Install Microcement Floors
A five-step system engineered for maximum adhesion, durability, and beauty. Every layer serves a purpose.
Surface Preparation
We assess and prepare the existing substrate. Concrete is ground and profiled. Tiles are cleaned and degreased. Cracks are repaired with flexible fillers. The surface must be flat, clean, and structurally sound.
Primer Application
Atriafloor Primer is rolled onto the prepared surface, creating a chemical bond between the substrate and the microcement system. For floors, this is followed by the rasante base coat.
Rasante Base Coat
Two coats of Atriafloor Rasante One — a cementitious skim coat reinforced with synthetic polymers — create a high-strength structural base specifically engineered for foot traffic.
Microcement Finish Coats
Two coats of SuperTitanium BC or Titanium are applied by steel trowel. Each coat is sanded between applications. This is where the color, texture, and character of your floor come to life.
Sealer & Protection
Two coats of New Atriapol Antibacterial — our two-component polyurethane antibacterial topcoat, ISO 22196:2011 certified — complete the sealed surface. The result: stain-resistant, UV-stable, non-yellowing, and ready for life. In wet-area installations, the system-level waterproofing is anchored by the liquid waterproofing membrane installed beneath the microcement.
The ATRIA Difference
Why Choose ATRIA for Your Floors
Polyurethane, Not Acrylic
Most microcement brands use acrylic resins — cheaper but prone to yellowing, softening under heat, and lower mechanical strength. ATRIA's polyurethane-dolomite formula is fundamentally superior in every measurable way.
Made in Sicily Since 1968
Colorificio Atria has been formulating coatings in Sicily for over 55 years. This is not a startup brand — it is decades of Italian chemistry expertise distilled into every bucket.
Two-Component Sealer
Our Atriapol Antibacterial is one of the only two-component polyurethane topcoats in the microcement industry. It delivers dramatically better hardness, chemical resistance, and UV stability than single-component alternatives.
Local Support in Dallas
ATRIA USA is based right here in Dallas, Texas. We provide hands-on training, technical support, and product supply to contractors and applicators across the DFW metroplex and beyond.
Tier Pricing
Tier-Priced by Substrate
Tier is determined by the substrate and the system spec it requires — not by client choice. Project minimums apply per tier.
| Surface | Fast | Standard | Full Build |
|---|---|---|---|
| Floors | $14–$18/sf | $19–$24/sf | $25–$34/sf |
| Walls | $18–$22/sf | $23–$28/sf | $29–$36/sf |
| Ceilings | $26–$32/sf | $32–$38/sf | $40–$50/sf |
Fast
Sound concrete and polished-concrete substrates in good condition. Minimal prep, shortest cycle.
Standard
Tile, backer board, gypsum self-leveler. The tier most residential projects fall into.
Full Build
MDF, plywood, OSB, radiant-heat slabs, steel, commercial wet rooms. Includes Glass Mat 300 mesh reinforcement, two Cementius Pasta build-up coats, and extended cure protocol.
Common Questions
Microcement Floor FAQ
With proper installation and maintenance, ATRIA microcement floors last 15–25+ years. The polyurethane-dolomite formula is exceptionally durable, and the Atriapol Antibacterial sealer can be recoated periodically to refresh the surface without any demolition.
Yes. Microcement is an overlay system — it bonds directly to existing tile, concrete, self-leveling compound, and many other substrates. This eliminates costly and messy demolition. The total added thickness is only 2–3mm.
No. The matte and satin finishes of Atriapol Antibacterial provide excellent slip resistance. For wet areas or commercial kitchens, we can add anti-slip additives to the topcoat for enhanced traction without compromising aesthetics.
Installed microcement floors are tier-priced based on substrate. Fast tier (sound concrete, polished-concrete substrates) runs $14–$18/sf. Standard tier (tile, backer board, gypsum self-leveler) runs $19–$24/sf. Full Build tier (MDF, plywood, OSB, radiant-heat slabs, steel, commercial wet rooms) runs $25–$34/sf and includes Glass Mat 300 fiberglass mesh reinforcement, two Cementius Pasta build-up coats, and extended cure protocol. Product selection — Titanium (1-component) or SuperTitanium BC (2-component) — follows the project, not the tier. Project minimums apply per tier.
Ready for Seamless Floors?
Get a free consultation and quote for your residential or commercial microcement floor project in Dallas-Fort Worth.