VENEZIANO Collection
Stucco Marmorino Fine
Italian lime plaster. Soft satin depth.
Lime-based decorative plaster · 20 kg
Natural depth, a refined finish.
Made with lime putty and marble dust, Stucco Marmorino Fine brings the character of traditional Italian plaster to interior walls. Two hand-trowelled coats create a smooth, compact satin surface, with subtle movement and a sheen shaped by the applicator's burnishing technique.
A breathable mineral finish for living rooms, bedrooms, entrances and thoughtfully designed commercial interiors.
Order a Marmorino sample board - $15Price
$249.99
Select color
Texture preview: Sabbia
Matte/satin Marmorino, not polished Veneziano. Screen colors are approximate; approve a physical sample in your lighting before ordering material.
Coverage calculator
Marmorino Fine coverage
20 kg bucket
Estimate
2 units
Approx. $499.98
Product needed
26.01-32.52 kg
Before waste buffer
One 20 kg bucket covers about 62-77 sq ft for this application.
Marmorino Fine TDS: 2.8-3.5 kg/m2 total for two coats
TDS-based estimate only. Substrate condition, texture depth, color choice, and installer technique can change real usage.
Lime-putty and marble-dust plaster for smooth, satin interior walls. 20 kg bucket.
Technical specifications
- Composition
- Lime putty, marble dust and specific additives
- Finish
- Smooth and satin; burnishing can increase the sheen
- ATRIA USA pack
- 20 kg
- Application
- Two coats with a rounded-edge stainless steel trowel
- Consumption
- 2.8-3.5 kg/m² total for two coats
- Approximate coverage
- 62-77 sq ft per bucket, before waste
- Density
- 1.65 ± 0.05 kg/L
- Dilution
- Ready to use; water only if necessary, maximum 2%
- Use
- Interior decorative surfaces
- Application temperature
- +5°C to +35°C
- Storage
- 12 months; protect from frost and direct sunlight
Preparation and care
Apply to sound, dry, fully cured surfaces. Prepare lime or lime-cement plaster and plasterboard with a suitable compatible primer. The technical sheet identifies Isoacryl diluted 1:5 for substrate preparation.
Apply two thin coats with a rounded-edge stainless steel trowel, then burnish to develop the desired sheen. A compatible natural wax may be used for additional protection. Confirm recoating and polishing timing with ATRIA before application.
Dust with a soft cloth. For light marks, test a slightly damp cloth and mild neutral detergent in an inconspicuous area. Avoid abrasive cleaners, acids, steam cleaning and standing water.
Safe handling
The supplied SDS classifies the wet product as causing severe skin burns and eye damage. Follow its protective-equipment and handling instructions before opening or applying the material.
This is an interior decorative wall finish, not a shower waterproofing membrane.
Interior palette
Review your preferred color on a physical sample before ordering material. Lighting, substrate and application affect the finished appearance.
Technical documents
Technical Data Sheet (PDF)
Application, consumption and product specifications
Safety Data Sheet (PDF)
Handling and protection · revision August 24, 2026
English machine translations supplied for this product. Confirm the application schedule with ATRIA technical support.