Wild Rust Iron Set — lifestyle
Wild Rust Iron Set — Rust EffectRust Effect
Wild Rust Iron Set — Rust EffectRust Effect
Wild Rust Iron Set — Rust EffectRust Effect
Wild Rust Iron Set — Rust EffectRust Effect
Wild Rust Iron Set — Rust EffectRust Effect

METALLICUM

Wild Rust Iron Set

Complete 3-bottle Corten rust system — Iron base + Activator + Protective sealer

Complete Set — All 3 ComponentsLimited Dallas Restock

Complete 3-bottle Corten rust effect system. Includes Wild Rust Iron base 2.5L with real iron aggregates, Wild Rust Activator 0.75L for triggering oxidation, and Wild Rust Protective Sealer 0.75L for locking in the patina. Apply two coats of base, then activate to develop genuine, evolving rust patterns. Shades range from warm oxide red to deep brown depending on number of activator applications. Seal with included Protettivo for permanent finish. Interior and exterior use.

Tier: Signature3-bottle Set: 2.5L base + 0.75L Activator + 0.75L Sealer

Price

$332.97

Limited Dallas Restock

Limited Dallas restock now available after preorder fulfillment. Individual components are temporarily reserved for complete set fulfillment.

Coverage calculator

Wild Rust system estimator

Complete Set + refills

Recommended plan

Based on 100 sq ft (9.3 m2), including buffer.

Approx. $690.93

Wild Rust Iron Set

Supplies the 2.5L base. The base usually covers more area than the activator and sealer.

1

Extra Wild Rust Activator

2 total activator bottles needed for the area.

View refill

1

Extra Wild Rust Protective Sealer

4 total sealer bottles needed for 2 coats.

View refill

3

The base inside one Set covers about 161-215 sq ft for two base coats, but the activator and sealer are smaller bottles.

TDS source: Base 6-8 m2/L for two coats; Activator 7-10 m2/L for two coats; Protettivo 8-10 m2/L per coat.

This updates only the Complete Set quantity. Individual refill bottles are temporarily reserved for set fulfillment, so contact ATRIA if this project needs extra activator or sealer.

TDS-based estimate only. Wild Rust consumption changes with substrate, desired oxidation intensity, spray/brush method, and protection requirements.

1

Limited-restock quantity is checked again at checkout.

Talk to ATRIA

Professional-Grade Application Product

This product is part of a multi-step application system that requires proper surface preparation and technique for best results.

Complete 3-bottle Corten rust effect system. Includes Wild Rust Iron base 2.5L with real iron aggregates, Wild Rust Activator 0.75L for triggering oxidation, and Wild Rust Protective Sealer 0.75L for locking in the patina. Apply two coats of base, then activate to develop genuine, evolving rust patterns. Shades range from warm oxide red to deep brown depending on number of activator applications. Seal with included Protettivo for permanent finish. Interior and exterior use.

Specifications

  • Coverage: 6–8 m²/L (2 coats) ≈ 15–20 m² per 2.5L
  • Coats: 2 required (+ Attivatore + Protettivo)
  • Application: Brush or short-haired roller
  • Density: 1.640 ± 0.05 kg/L
  • Dry residue: 72 ± 2%
  • Appearance: Matt, metallic dark grey
  • Touch-dry: 1–2 hours
  • Deep dry: 18–24 hours
  • Overcoating: 4–6 hours
  • Dilution: Water 20–30%
  • Use: Interior and exterior*
  • Storage: 12 months
  • Packaging: 1L, 2.5L

Key Features

  • Authentic Corten rust effect — real iron particles with controlled oxidation
  • Single-component, gel acrylic resin formula
  • Modular oxidation — more activator coats = deeper rust effect
  • Shades range from oxide red to deep brown
  • Interior AND exterior use (with Protettivo protection)
  • Textured, vibrant surface with industrial character
  • Water-based, low environmental impact
  • Step 1: Prime surfaces with Atriafloor Primer BC before application
  • 4-step system: Primer + Base + Activator + Protector
Shop METALLICUM in the Store →

Go to the METALLICUM store page to see available products, sizes, calculators, color options, and related materials.

What’s in this Set

Three components — one Complete Set

Wild Rust Iron

2.5L

Decorative iron-particle base

Coverage: ~15–20 m² for 2 coats (6–8 m²/L × 2.5L)

Individual price

$166.99

View refill SKU →

Wild Rust Activator

0.75L

Triggers oxidation reaction (rust formation)

Coverage: ~5.25–7.5 m² for 2 coats

Individual price

$69.99

View refill SKU →

Wild Rust Protective Sealer

0.75L

Locks in patina, prevents further oxidation, weather seal

Coverage: ~6–7.5 m² per coat; ~3–3.75 m² for 2 coats

Individual price

$95.99

View refill SKU →

Components total: $332.97

Wild Rust Iron Set: $332.97

Wild Rust requires all three components — base, activator, and protective sealer — to develop and preserve the oxidized finish. Sold as a Complete Set for guaranteed compatibility. Set price equals the exact sum of components — no markup, no discount.

Already have the Set and need to top up? Individual refills are temporarily reserved for Complete Set fulfillment during this limited restock: Iron Base · Copper Base · Activator · Protective Sealer. Join the waitlist on each refill page or contact ATRIA for project-specific availability.

More in METALLICUM